Page 261 - Railways Applications Terminal blocks

ZS10-S screw clamp terminal blocks
Disconnect with blade - 8 mm 0.315 in spacing

Description
10 mm²
– Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
6 AWG – Same profile as ZS10 feed-through terminal block for aligned marking and identical end section use.

Ordering details
Description Color Type Part Number Pkg Weight
qty (1 pce) g
Disconnect Profile aligned with ZS10 Grey ZS10-S 1SNK508315R0000 50 8.60
1SNK161058F0014 Main technical data Mounting instructions
8.60
1SNK508320R0000
ZS10-S-BL
50
Blue
UL - CSA
TH 35-7.5,
Rail
IEC
Connecting capacity
TH 35-15
1 conductor Rigid: Solid/Stranded 0.2 ... 10 mm² 24 ... 6 AWG Wire stripping 12 mm
per clamp Flexible without ferrule 0.22 ... 10 mm² length 0.472 in
Flexible with non insulated ferrule 0.22 ... 10 mm² 24 ... 12 AWG
ZS10-S Flexible with insulated ferrule 0.22 ... 6 mm² 24 ... 12 AWG
Gauge A5-B5
2 conductors Rigid: Solid/Stranded 0.5 ... 4 mm² 20 ... 12 AWG Tool Flat screwdriver
per clamp Flexible without ferrule 0.5 ... 4 mm² Ø 4 mm
53 2.09" Flexible with twin ferrule 0.5 ... 4 mm² 20 ... 12 AWG Ø 0.157 in
Rated current / Rated cross section 25 A / 4 mm² 25 A / 6 AWG
Maximum current / Maximum cross section 42 A / 10 mm²
Rated short-time withstand current (1s) 480 A Torque 1.3 Nm ± 0.3
11.5 lb.in ± 2.65
Rated voltage 630 V 300 V
60.4 2.37" 52.9 2.08" 67.2 2.64" 59.7 2.35" Impulse withstand voltage 6000 V NEMA 1
IP20
Protection
Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted
with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity.
26.7 1.05"
Furthermore, as specified per IEC 60947-7-1, disconnect terminal blocks are intended to be used for temporary
8 mm 0.315 in spacing disconnection at zero potential and at no load.
The connecting capacity data for one Rigid: Solid/Stranded, or one Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors).
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on http://www.TE.com
CE CB RoHS USR CSA EAC BV DNV
Accessories
Description Color Type Part Number Pkg Weight
1 2
qty (1 pce) g
1 End stops 10 mm 0.394 in Dark grey BAM4 1SNK900001R0000 50 14.00
2 End sections 2.2 mm 0.087 in Dark grey ES4 1SNK505910R0000 20 2.20
3 Circuit separators 3 mm 0.118 in Dark grey CS-R1 1SNK900103R0000 20 5.20
3 4 4 Terminal block Blank marker White MG-CPM 13 41791 1SNB041791R0612 1680 0.27
markers Blank card MC812 1SNK160000R0000 22 10.00
MC812PA 1SNK169999R0000 20 14.00
Universal wire markers holder Grey UMH 1SNK900611R0000 10 0.20
Complete list of accessories is indicated in the terminal block datasheet including end stops.
Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 8

1SNK161050S0201

Technical data valid for copper conductors only.
PAGE 259