Page 6 - SNK SERIES TERMINAL BLOCKS

ENTRELEC Terminal blocks

TE Connectivity proposes one of the largest Din Rail Terminal block offering on the
market with various technologies: screw, PI-Spring, spring, IDC, pluggable, stud, etc.
found in over 8000 products & solutions.

SNK Dedicated applications Terminal blocks for DBL power ESSAILEC Interfast PLC Marking
®
terminal blocks terminal blocks railway applications distribution blocks test blocks pre-wiring system solutions
1

Scope Qualified for worldwide applications and Specific terminal blocks and technologies The largest offering on The preferred choice for primary Test blocks for safe and easy PLC pre-wiring system for fast, Markers & marking systems for
severe environments (such as hazardous for dedicated applications and markets. the market for rolling power distribution and solar testing on secondary circuits flexible, reliable connection of PLC’s all identification requirements in
locations, railways, marine and solar stock and infrastructures. applications. of current and voltage in process automation applications. electrical panels.
applications..). transformers and sensors.
From 0.2 to 300 mm².
Product SNK PI-Spring Feed-through ADO System (IDC) ADO-ADO or ADO-screw clamp SNK PI-Spring technology From 80 A up to 550 A (IEC) Current and voltage Interfast PCB: Terminal block identification and
®
families & technology Multi-deck 0.22 to 4 mm² Feed-through / Multi-deck / 2.5 to 16 mm² sockets & plugs Compact & standard modules group markers
functions 2.5 to 16 mm² Ground 24 to 12 AWG Ground / Disconnect / 12 to 4 AWG Modular blocks: single pole, three
12 to 4 AWG Disconnect for fuses / Component holder & four poles, up to 12 outputs Simultaneous testing of Interfast MS: Wire and cable identification
for fuses 1 to 4 independent circuits Modular system based on
Component holder Terminal blocks types: on the same socket terminal block technology Component and equipment
Safety (spring loaded) Feed-through SNK pluggable 2 to 10 poles, up to 20 outputs identification
0.22 to 10 mm² Disconnect screw & PI-Spring technologies Several testing principle such Functions:
24 to 6 AWG Test & measurement 2.5 to 4 mm² as “make before break” for safe Panel identification
12 to 10 AWG current transformer testing – 1 to 4 wire connections (sensors)
– Disconnect
®
SNK screw clamp Feed-through Stud One stud ADO System (IDC) Pre-printed markers for terminal
technology Multi-deck 25 to 300 mm² 2 studs 1.5 to 4 mm² Panel and switchboard – Fuse blocks
4 to 240 mm² Ground 4 AWG to 1000 Kcmil One stud - One screw clamp 16 to 12 AWG mounting : base, flush, rack, – Signal indication
12 to 500 Kcmil Disconnect TH35 rail – Relays
for fuses Ring lug Feed-through Stud
Test & measurement 6 to 16 mm² Test & measurement 4 to 185 mm² Multicircuits sockets & plugs – Optocouplers
Marshalling 8 to 6 AWG – Solenoid valve control
Component holder – Galvanic isolation (2.5 kV).
SNK pluggable Feed-through Miniblocks Screw clamp Quick-connect
screw & PI-Spring Multi-deck 1.5 to 6 mm² Spring 2.5 to 6 mm²
technologies Ground 18 to 8 AWG ADO System (IDC)
®
2.5 to 4 mm²
12 to 10 AWG
Other types
Test & measurement: with sliding link, blade, plug
Pluggable: feed-through, double deck, disconnect
Sensors/actuators: screw, spring, ADO system (IDC)
Installation: screw, spring
Protection: ground + neutral
Component holders: screw, spring, ADO system (IDC)

www.te.com

INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS