Page 194 - 1SNC160020C0201_Solution series

D2.5/5.C3.L spring terminal blocks

Sensors / Actuators - 5 mm 0.197 in spacing

1.5 mm² Description
Save spacing with 3 decks terminal block, adapted for sensor/actuator in just 5 mm 0.197 in spacing,
16 AWG Easy to access thanks to the front wiring entry,
Clamping contact pressure non dependent on the operator and automatic creeping compensation.
Ordering details
Description Color Type Order code Pkg (1 pce) g
Weight
pce
1SNC162109F0014 Sensor 3 wires Grey D2.5/5.C3.L 1SNA290350R2100 50 11.00
Main technical data
Mounting instructions
IEC UL CSA Rail TH 35-7.5,
TH 35-15
1 conductor Rigid - Solid / Stranded 0.14-1.5 mm² 24-16 AWG Wire stripping 9.5 mm
D2.5/5.C3.L per clamp Flexible 0.14-1.5 mm² length 0.37 in
with non insulated ferrule
with insulated ferrule 0.5-1 mm² Tool Flat screwdriver
Gauge A1 Ø 3.5 mm
Ø 0.138 in
79 3.10"
Rated current / Rated cross section 17.5 A / 1.5 mm² 10 A / 16 AWG
180 A
Rated short-time withstand current (1s)
56 2.20" 48.5 1.91" Rated voltage 300 V 300 V
Impulse withstand voltage
4000 V
Protection IP20 NEMA 1
The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards.
37.5 1.47" All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certifcates and technical datasheet available on http://www.ABB.com
RoHS CSA Gost R
Notes

9 5 mm 0.197 in spacing To obtain finger safety (IP20) of a terminal block assembly with comb type
jumper bar, it is necessary to put one end section on each side of the terminal
block assembly.

Accessories
Description Color Type Order code Pkg Weight
pce (1 pce) g
1 2 1 End stops 9 mm 0.354 in Grey BADL 1SNA399903R0200 50 4.70
10 mm 0.394 in BAM2 1SNA206351R1600 50 12.00
2 End section kits 5 mm 0.197 in Grey FED5.C3.L 1SNA290358R2500 20 10.00
3 Jumper bars 2 poles 24 A Orange BJDL5-2 1SNA291102R2300 50 1.00
3 4 3 poles BJDL5-3 1SNA291103R2400 50 0.70
4 poles BJDL5-4 1SNA291104R2500 50 0.80
5 poles BJDL5-5 1SNA291105R2600 20 0.90
10 poles BJDL5-10 1SNA291110R2600 20 1.20
4 Lateral jumper bars 34 poles Blue PC5.34 1SNA290365R1400 10 18.00
5 Red 1SNA290366R1500 10 18.00
Green-yellow 1SNA290367R1600 10 18.00
5 Terminal block markers Blank card White RC55 1SNA230000R1200 1 2.90
Complete list of accessories is indicated in the terminal block datasheet.
Some accessories such as jumper bars may modify the terminal blocks ratings: complete information in the accessories catalogue pages.

1SNC162027S0201 - Rev. A

All the technical data for UL/CSA standard and dimensions in inches are in italic.
Technical data valid for copper conductors only.
188 | ABB Solution series - Terminal blocks