Page 28 - 1SNC160020C0201_Solution series

D6/8.P.ADO IDC terminal blocks

Ground ADO - screw clamp - 8 mm 0.315 in spacing

4 mm² Description
Protect your installation in the event of a short-circuit thanks to our screwless rail contact non operator
12 AWG dependent,
Secure mounting or removal from the rail,
2 This solution brings all the benefts of the ADO System and allows installators to connect on standard screw
®
clamp.
Ordering details
Description Color Type Order code Pkg Weight
1SNC163101F0014 Ground Screwless rail connection, Green-yellow D6/8.P.ADO3 1SNA399251R1300 50 14.00
(1 pce) g
pce
with white marking
for wire size
4 mm² (12 AWG)
Main technical data Mounting instructions
IEC UL CSA Rail TH 35-7.5,
D6/8.P.ADO TH 35-15
ADO Rigid - Solid / Stranded 4 mm² 12 AWG Wire stripping 12 mm
Flexible 4 mm² length 0.47 in
Screw clamp Rigid - Solid / Stranded 0.2-10 mm² 22-8 AWG Tool Flat screwdriver
50 1.97"
Flexible 0.22-6 mm² Ø 4 - 5 mm
with insulated ferrule Ø 0.157 - 0.197 in
Gauge A5
4 mm²
56 2.20" 48.5 1.91" Rated cross section 480 A NEMA 1 12 AWG Torque 0.8 - 1 N.m
Rated short-time withstand current (1s)
IP20
Protection
7.1 - 8.9 lb.in
The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards.
25 0.98" All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certifcates and technical datasheet available on http://www.ABB.com
CUS
RoHS cCSAus Gost R
8 mm 0.315 in spacing

Accessories
Description Color Type Order code Pkg Weight
pce (1 pce) g
1 2
1 End stops 10 mm 0.394 in Grey BAM2 1SNA206351R1600 50 12.00
9 mm 0.354 in BADL 1SNA399903R0200 50 4.70
2 End sections 3 mm 0.118 in Grey FEDAD1 1SNA199336R2000 20 2.50
3 Tools Semi automatic tool OUPAD 1SNA178944R0400 1 205.00
3 4 Hand tool OUMAD 1SNA179466R0600 1 29.00
4 Terminal block markers Blank card White RC810 1SNA234000R0200 1 8.20
Complete list of accessories is indicated in the terminal block datasheet.
Some accessories such as jumper bars may modify the terminal blocks ratings: complete information in the accessories catalogue pages.

1SNC163012S0201 - Rev. A

All the technical data for UL/CSA standard and dimensions in inches are in italic.
Technical data valid for copper conductors only.
26 | ABB Solution series - Terminal blocks