Page 40 - 1SNC160020C0201_Solution series

D4/8.SF.I.ADO IDC terminal blocks
For 5 x 20 and 5 x 25 fuses - with test socket ADO - screw clamp

8 mm 0.315 in spacing

2.5 mm² Description
Protect your circuits with 5 x 20 and 5 x 25 fuse terminal blocks (fuse not delivered with the terminal blocks),
14 AWG Quickly identify the defective circuit thanks to blown fuse indicators,
With the ABB ADO System , experience the fastest and most reliable connection on the market,
®
2 This solution brings all the benefts of the ADO System and allows installators to connect on standard screw
®
clamp,
®
Up to 2 wires per connection in the ADO System connection.
1SNC163123F0014 Ordering details Color Type Order code Pkg Weight
Description
Fuse With blown fuse indicator by Grey D4/8.SFLT2.I.ADO2 1SNA399768R2100 pce (1 pce) g
13.00
50
neon 110 - 230 V and 2 test
sockets DIA 2 mm 0.079 in,
D4/8.SF.I.ADO with black marking for wire size
1-2.5 mm² (16-14 AWG)
With blown fuse indicator by Grey D4/8.SFDT2.I.ADO2 1SNA399770R2700 50 13.00
LED 24 V and 2 test sockets
DIA 2 mm 0.079 in,
68.2 2.68" with black marking for wire
size 1-2.5 mm² (16-14 AWG)
180°
Main technical data Mounting instructions
94 3.70" 86.5 3.40" 55.9 2.20" 48.4 1.90" IEC UL CSA Rail TH 35-7.5,
TH 35-15
Rigid - Solid / Stranded
ADO
Flexible 1-2.5 mm² Wire stripping 9.5 mm
length
0.37 in
1-2.5 mm²
Screw clamp Rigid - Solid / Stranded 0.2-4 mm² Tool Flat screwdriver
25.5 1.00" Flexible 0.22-4 mm² Ø 4 mm
with insulated ferrule Ø 0.157 in
Gauge A4
8 mm 0.315 in spacing Rated current / Rated cross section 6.3 A / 2.5 mm²
Rated short-time withstand current (1s) 300 A Torque 0.5 - 0.8 N.m
Rated voltage 500 V 4.4 - 7.1 lb.in
Impulse withstand voltage 6000 V
Protection IP20 NEMA 1
The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards.
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certifcates and technical datasheet available on http://www.ABB.com
RoHS Gost R
Accessories
1 2 Description Color Type Order code Pkg Weight
pce (1 pce) g
1 End stops 10 mm 0.394 in Grey BAM2 1SNA206351R1600 50 12.00
9 mm 0.354 in BADL 1SNA399903R0200 50 4.70
3 4 2 End sections 1.5 mm 0.059 in Grey FEDAD10 1SNA399758R2700 20 3.00
3 Lateral jumper bars 10 poles 35 A PC81-10 1SNA173523R1100 10 5.00
4 Test plugs DIA 2 mm 0.079 in Black FC2 1SNA007865R2600 100
5 Fuses 0.5 A FU520 1SNA008288R1500 10
1 A 1SNA008290R1300 10
5 6 2 A 1SNA008291R0000 10
3.15 A 1SNA008289R1600 10
5 A 1SNA008292R0100 10
6 Assembly rods 2 poles TGA8 1SNA168672R1100 10 1.00
7 8 3 poles 1SNA168673R1200 10
4 poles 1SNA168674R1300 10
7 Spring retaining rings ANT 1SNA168675R1400 10
8 Tools Semi automatic tool OUPAD 1SNA178944R0400 1 205.00
Hand tool OUMAD 1SNA179466R0600 1 29.00
9 9 Terminal block markers Blank card White RC810 1SNA234000R0200 1 8.20
Complete list of accessories is indicated in the terminal block datasheet.
Some accessories such as jumper bars may modify the terminal blocks ratings: complete information in the accessories catalogue pages.
Disconnect IDC terminal blocks
Description Color Type Order code Pkg Weight 1SNC163023S0201 - Rev. A
pce (1 pce) g
Disconnect Profle aligned with D4/8.SF.I.ADO Grey, blue D4/8.SNNT2.I.ADO2 1SNA399766R1700 50 13.00
All the technical data for UL/CSA standard and dimensions in inches are in italic.
Technical data valid for copper conductors only.
38 | ABB Solution series - Terminal blocks