Page 9 - 1SNC160020C0201_Solution series

ADO System IDC technology
®
The fastest and most reliable connection technology

ADO system is based on Insulation Displacement Connec- Our ADO system features one single piece which (when as- 1
®
®
tion (IDC) technology. IDC technology can be found in various sociated with its dedicated tool) combines the wire prepara-
applications outside the electrical word. (RJ45 connectors tion and the wire connection. Its design is made to connect
used in Telecom for instance). up to two conductors (standard wires as well as special wires)
in the same jaw.

Features

Corrosion proof

Gas-tight connection Low galvanic couple of
Contact points are copper alloy jaw pinching
wrapped by the wire at two points.
Contact lips: the insulation.
allows the electrical
contact with a permanent
cable contact pressure Cone entry shape:
allows the insulation
cutting

Vibration proof

Wire insulation is
ADO system jaw: pinched by the
®
"C shape" spring insulating body. Contact forces are
permanently balanced.
Unstripping insulator
absorbs vibrations.
Instructions:

1 2 3 4

Two
conductors

1 Insert the wire (not stripped) in the ADO System jaw until it butts. 4 Follow the same process if a second wire has to be
®
2 Position the tool in the recess and pull the trigger fully and release it. connected (same size and same nature).
3 Remove the trigger. (the tool will not be released if the connection is not completed). The first wire preliminary installed, will remain perfectly
and safely maintained in the clamp during the second wire
cabling process.

From 0.22 mm² up to 4 mm²
From 24 AWG up to 12 AWG

1SNC163080S0201_dupli

ABB Solution series - Terminal blocks | 7