Page 255 - Railways Applications Terminal blocks

ZS4-S screw clamp terminal blocks
Disconnect with blade - 5.2 mm 0.205 in spacing

Description
4 mm²
– Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
10 AWG – Same profile as ZS4 feed-through terminal block for aligned marking and identical end section use.

Ordering details
Description Color Type Part Number Pkg Weight
qty (1 pce) g
Disconnect Profile aligned with ZS4 Grey ZS4-S 1SNK505310R0000 50 8.60
1SNK161002F0014 Orange ZS4-S-OR 1SNK505330R0000 50 8.60
ZS4-S-BL
8.60
50
1SNK505320R0000
Blue
Main technical data
Connecting capacity IEC UL - CSA Mounting instructions TH 35-7.5,
Rail
TH 35-15
1 conductor Rigid: Solid/Stranded 0.2 ... 4 mm² 24 ... 10 AWG Wire stripping 10.5 mm
per clamp Flexible without ferrule 0.2 ... 4 mm² length 0.412 in
ZS4-S Flexible with non insulated ferrule 0.22 ... 4 mm² 24 ... 10 AWG
Flexible with insulated ferrule 0.22 ... 2.5 mm² 24 ... 14 AWG
Gauge A3-B3
2 conductors Rigid: Solid/Stranded 0.2 ... 1.5 mm² 24 ... 16 AWG Tool Flat screwdriver
53 2.09" per clamp Flexible without ferrule 0.2 ... 1.5 mm² Ø 3.5 mm
Flexible with twin ferrule 0.22 ... 1.5 mm² 24 ... 16 AWG Ø 0.138 in
Rated current / Rated cross section 25 A / 4 mm² 25 A / 10 AWG
Rated short-time withstand current (1s) 480 A Torque 0.6 Nm ± 0.1
5.31 lb.in ± 0.885
60.4 2.37" 52.9 2.08" 67.2 2.64" 59.7 2.35" Rated voltage 400 V 150 V
6000 V
Impulse withstand voltage
Protection IP20 NEMA 1
Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted
26.7 1.05" with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity.
5.2 mm 0.205 in spacing Furthermore, as specified per IEC 60947-7-1, disconnect terminal blocks are intended to be used for temporary
disconnection at zero potential and at no load.
The connecting capacity data for one Rigid: Solid/Stranded, or one Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors).
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on http://www.TE.com
CE CB RoHS USR CNR CSA EAC BV DNV Rina
Accessories
Description Color Type Part Number Pkg Weight
1 2
qty (1 pce) g
1 End stops 10 mm 0.394 in Dark grey BAM4 1SNK900001R0000 50 14.00
2 End sections 2.2 mm 0.087 in Dark grey ES4 1SNK505910R0000 20 2.20
3 Lateral jumper bars 2 poles 30 A (IEC) Grey PC5-2 1SNA113542R1000 10 1.80
3 4 10 poles 30 A (IEC) PC5-10 1SNA113544R1200 10 6.00
4 Circuit separators 3 mm 0.118 in Dark grey CS-R1 1SNK900103R0000 20 5.20
5 Shield connectors SHBS 1SNK900600R0000 20 3.50
6 Protecting covers 5.2 mm 0.205 in spacing Transparent PL5 1SNK900618R0000 10 1.50
7 Terminal block Blank marker White MG-CPM 13 41790 1SNB041790R0512 1960 0.23
5 6
markers Blank card MC512 1SNK140000R0000 22 9.00 8
MC512PA 1SNK149999R0000 20 10.00
Universal wire markers holder Grey UMH 1SNK900611R0000 10 0.20
Complete list of accessories is indicated in the terminal block datasheet including end stops.
7 Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog.

1SNK161010S0201

Technical data valid for copper conductors only.
PAGE 253