Page 63 - Catalog Softstarters PSR PSE PSTX

Fieldbus communication Purple cable

FieldBusPlug ordering details

Profibus DP FieldBusPlug
– Ready-made Profibus DP fieldbus interface with various cable lengths.
– Supports PROFIBUS DP V0 and V1
– Applicable on all FBP motor starters and other devices
– Degree of protection IP65, diagnostic LED
Designation Cable length Type Order code Pkg Weight
qty (1 pce)
kg (lb)
Profibus DP FBP 0.25 m PDP22-FBP.025 1SAJ240100R1003 1 0.09 (0.20)
Profibus DP FBP 0.50 m PDP22-FBP.050 1SAJ240100R1005 1 0.10 (0.22)
Profibus DP FBP 1.00 m PDP22-FBP.100 1SAJ240100R1010 1 0.13 (0.29)
Profibus DP FBP 2.00 m PDP22-FBP.200 1SAJ240100R1020 1 0.20 (0.44)
Profibus DP FBP 5.00 m PDP22-FBP.500 1SAJ240100R1050 1 0.36 (0.79)

PDP22-FBP 5
Profibus DP FieldBusPlug for four devices
– PDQ22 is a member of the ABB’s FieldBusPlug family of bus connectors. It allows the connection
of up to four devices to Profibus DP by just using one Profibus node access. This allows a cost
efficient device integration for devices that are located physically nearby. PDQ22 supports DP-V0
and DP-V1. The degree of protection is IP66. There are separate diagnosis LEDs for bus and device
status.
Note that the accessory PDQ22-FBP only works with the PSR and PSE softstarter.
Designation Type Order code Pkg Weight
qty (1 pce)
kg (lb)
(0.44)
1
1SAJ240200R0050
PDQ22-FBP
Quadruple bus connector
0.20
2CDC341048F0006 DINrail adapter for PDQ22-FBP CDA11-FBP. 0 1SAJ929300R0001 1 1 0.11 (0.24)
CDP11-FBP.0
1SAJ929100R0001
0.50
Fixing bracket for passive plug of connec-
(1.10)
tion cable
PDQ22-FBP
Configuration software
– This cable and software can be used for setup and comissioning of the softstarter as well as to
keep back-up of the parameter settings.
Designation Type Order code Pkg Weight
qty (1 pce)
kg (lb)
USB to FBP interface cable UTF21-FBP 1SAJ929400R0002 1 1 0.01 (0.02)
2CDC341001S0011 frame application
PDP22/PDQ22 Device Type Manager (DTM) incl. FDT/DTM
PBDTM-FBP
1SAJ924012R0005
-
-
To connect the softstarter to a Profibus DP fieldbus system...
you need specific software for PLC setup, (GSD file) which is available at
new.abb.com/low-voltage/products/softstarters
If you need help or advice, please contact your local ABB office.

5/4 1SFC132012C0201 - Rev. B | Softstarter Catalog Softstarter Catalog | 1SFC132012C0201 - Rev. B | 5/5