Page 131 - 1SNC160020C0201_Solution series

DR2.5/5.ADO IDC terminal blocks

Miniblocks ADO - screw clamp - 5 mm 0.197 in spacing

1 mm² Description
The mini blocks are particularly designed for applications where space is very restricted,
18 AWG With the ABB ADO System , experience the fastest and most reliable connection on the market,
®
This solution brings all the benefts of the ADO System and allows installators to connect on standard screw
®
clamp,
®
Up to 2 wires per connection in the ADO System connection.
Ordering details
Description Color Type Order code Pkg Weight
1SNC163073F0014 Feed-through With rib Grey DR2.5/5.ADO 1SNA399509R1700 100 4.00
(1 pce) g
pce
20
DRE2.5/5.ADO
Grey
1SNA399513R2200
4.00
Without rib for TB
assembly extremity
Main technical data Mounting instructions
IEC UL CSA Rail TH 15-5.5
DR2.5/5.ADO ADO Rigid - Solid / Stranded 0.2-1 mm² 24-18 AWG Wire stripping 9.5 mm
Flexible 0.22-1 mm² length 0.374 in
Screw clamp Rigid - Solid / Stranded 0.2-4 mm² 24-12 AWG Tool Flat screwdriver 6
Flexible 0.22-2.5 mm² Ø 3.5 mm
31 1.22" with insulated ferrule Ø 0.138 in
Gauge A3
Rated current / Rated cross section 13.5 A / 1 mm² 10 A / 18 AWG
33.5 1.32" Rated short-time withstand current (1s) 120 A 600 V Torque 0.4 - 0.6 N.m
800 V
Rated voltage
3.5 - 5.3 lb.in
Impulse withstand voltage
Protection 8000 V NEMA 1
IP20
15.5 0.61" The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards.
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certifcates and technical datasheet available on http://www.ABB.com
0.20" 5
DR
DRE RoHS USR CNR Gost R
Notes
5 mm 0.197 in spacing
End section FEAD1 to be mounted directly on the open part of the terminal
DRE... 5 - 6 - 8 FEAD1
block.
End terminal block DRE has to be mounted at the end of the terminal
blocks assembly: it reduces its size, because it suppresses the insulation
rib (- 4 mm).
FEAD5 Nota: This terminal block cannot be accidently located anywhere else into
the terminal block assembly (without locking holes)
Separator FEAD5 which snaps on the terminal blocks, separates and
makes visible the different parts of the terminal blocks assembly.
DR... 5 - 6 - 8
Accessories
1 2 Description Color Type Order code Pkg Weight
pce (1 pce) g
1 End stops 6.5 mm 0.256 in Grey BADRL 1SNA199420R2100 50 2.00
2 End sections 2.5 mm 0.098 in Grey FEAD1 1SNA199421R1600 20 1.30
3 Jumper bars 2 poles 13.5 A Orange BJADO5-2 1SNA205955R0300 20 1.00
3 4
3 poles BJADO5-3 1SNA205956R0400 20 1.00
10 poles BJADO5-10 1SNA205963R0300 10 5.00
4 Lateral jumper bars 2 poles 30 A Grey PC5-2 1SNA113542R1000 10 1.80
10 poles PC5-10 1SNA113544R1200 10 6.00
5 6 5 Insulating tips For lateral jumper bars type PC... EIP 1SNA113550R2400 10
6 Circuit separators 5 mm 0.197 in Grey FEAD5 1SNA199433R1200 20 1.80
7 Tools Semi automatic tool OUPAD 1SNA178944R0400 1 205.00
Hand tool OUMAD 1SNA179466R0600 1 29.00
8 Terminal block markers Blank card White RC55 1SNA230000R1200 1 2.90
1SNC163031S0201 - Rev. A
7 8
Complete list of accessories is indicated in the terminal block datasheet.
Some accessories such as jumper bars may modify the terminal blocks ratings: complete information in the accessories catalogue pages.

All the technical data for UL/CSA standard and dimensions in inches are in italic.
Technical data valid for copper conductors only.
ABB Solution series - Terminal blocks | 127