Page 133 - 1SNC160020C0201_Solution series

DR4/8.ADO IDC terminal blocks

Miniblocks ADO - screw clamp - 8 mm 0.315 in spacing

2.5 mm² Description
The mini blocks are particularly designed for applications where space is very restricted,
14 AWG With the ABB ADO System , experience the fastest and most reliable connection on the market,
®
This solution brings all the benefts of the ADO System and allows installators to connect on standard screw
®
clamp,
®
Up to 2 wires per connection in the ADO System connection.
Ordering details
Description Color Type Order code Pkg Weight
1SNC163090F0014 Feed-through With rib and 2 notches for Grey DR4/8.ADO 1SNA199279R1700 100 7.00
(1 pce) g
pce
wire size 1-2.5 mm²
(16-14 AWG)
Without rib for TB assembly Grey DRE4/8.ADO 1SNA299553R0600 20 7.00
extremity and 2 notches for
wire size 1-2.5 mm²
(16-14 AWG)
DR4/8.ADO Main technical data Mounting instructions
IEC UL CSA Rail TH 15-5.5
6
ADO Rigid - Solid / Stranded 1-2.5 mm² 16-14 AWG Wire stripping 9.5 mm
31 1.22" Flexible 1-2.5 mm² length 0.374 in

33.5 1.32" Screw clamp Rigid - Solid / Stranded 0.2-4 mm² 22-10 AWG Tool Flat screwdriver
Flexible
0.22-4 mm²
Ø 4 mm
Ø 0.157 in
with insulated ferrule
Gauge
Rated current / Rated cross section A4
24 A / 2.5 mm² 25 A / 14 AWG
15.5 0.61" Rated short-time withstand current (1s) 300 A Torque 0.5 - 0.8 N.m
Rated voltage 1000 V 600 V 4.4 - 7.1 lb.in
0.315" 8
DR Impulse withstand voltage 8000 V
DRE Protection IP20 NEMA 1
The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards.
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certifcates and technical datasheet available on http://www.ABB.com
8 mm 0.315 in spacing
RoHS USR CNR Gost R
Notes
End section FEAD1 to be mounted directly on the open part of the terminal
DRE... 5 - 6 - 8 FEAD1
block.
End terminal block DRE has to be mounted at the end of the terminal
blocks assembly: it reduces its size, because it suppresses the insulation
rib (- 4 mm).
FEAD5 Nota: This terminal block cannot be accidently located anywhere else into
the terminal block assembly (without locking holes)
Separator FEAD5 which snaps on the terminal blocks, separates and
makes visible the different parts of the terminal blocks assembly.
DR... 5 - 6 - 8
Accessories
1 2
Description Color Type Order code Pkg Weight
pce (1 pce) g
1 End stops 6.5 mm 0.256 in Grey BADRL 1SNA199420R2100 50 2.00
2 End sections 2.5 mm 0.098 in Grey FEAD1 1SNA199421R1600 20 1.30
3 4 3 Jumper bars 1 poles 24 A Grey AD2.5 1SNA114205R2000 50 1.60
4 Circuit separators 5 mm 0.197 in Grey FEAD5 1SNA199433R1200 20 1.80
5 Tools Semi automatic tool OUPAD 1SNA178944R0400 1 205.00
Hand tool OUMAD 1SNA179466R0600 1 29.00
6 Terminal block markers Blank card RCAL85 1SNA237000R0500 1 2.90
5 6
Complete list of accessories is indicated in the terminal block datasheet.
Some accessories such as jumper bars may modify the terminal blocks ratings: complete information in the accessories catalogue pages.

Ground IDC terminal blocks 1SNC163033S0201 - Rev. A
Description Color Type Order code Pkg Weight
pce (1 pce) g
Ground Profle aligned with DR4/8.ADO Green-yellow DR4/8.P.ADO 1SNA299632R0500 100 8.00
All the technical data for UL/CSA standard and dimensions in inches are in italic.
Technical data valid for copper conductors only.
ABB Solution series - Terminal blocks | 129