Page 141 - 1SNC160020C0201_Solution series

DS2.5/8.ADO IDC terminal blocks

Miniblocks ADO - ADO - 8 mm 0.315 in spacing

2.5 mm² Description
The mini blocks are particularly designed for applications where space is very restricted,
14 AWG With the ABB ADO System , experience the fastest and most reliable connection on the market,
®
Designed for control applications exposed to severe constrains (vibrations, shocks, corrosion etc.),
Up to 2 wires per connection.
Ordering details
Description Color Type Order code Pkg Weight
pce (1 pce) g
1SNC163096F0014 wire size 1-2.5 mm²
100
With rib and 2 notches for
Feed-through
1SNA299501R0300
6.00
DS2.5/8.ADO
Grey
(16-14 AWG)
Without rib for TB assembly
extremity and 2 notches Grey DSE2.5/8.ADO 1SNA299559R1400 20 6.00
for wire size 1-2.5 mm²
(16-14 AWG)
Main technical data Mounting instructions
DS2.5/8.ADO
IEC UL CSA Rail TH 35-7.5,
TH 35-15
6 ADO Rigid - Solid / Stranded 1-2.5 mm² 16-14 AWG Wire stripping
Flexible 1-2.5 mm² length
42.3 1.66"
31 1.22"
Screw clamp Rigid - Solid / Stranded Tool
Flexible
43 1.69" 35.5 1.39" with insulated ferrule
Gauge
Rated current / Rated cross section
300 A
Rated short-time withstand current (1s) 24 A / 2.5 mm² 25 A / 14 AWG Torque
20.6 0.81" Rated voltage 1000 V 600 V
Impulse withstand voltage
0.315" 8 Protection IP20 NEMA 1
DS
DSE The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards.
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certifcates and technical datasheet available on http://www.ABB.com
8 mm 0.315 in spacing RoHS cCSAus Gost R
CUS
Notes
End section FEAD2 to be mounted directly on the open part of the terminal
DSE... 5 - 6 - 8 FEAD2
block.
End terminal block DSE has to be mounted at the end of the terminal
blocks assembly: It reduces its size, because it suppresses the insulation
rib (- 4 mm).
FEAD6 Nota: This terminal block cannot be accidently located anywhere else into
the terminal block assembly (without locking holes)
Separator FEAD6 which snaps on the terminal blocks, separates and
makes visible the different parts of the terminal blocks assembly.
DS... 5 - 6 - 8
Accessories
Description Color Type Order code Pkg Weight
1 2 pce (1 pce) g
1 End stops 10 mm 0.394 in Grey BAM2 1SNA206351R1600 50 12.00
9 mm 0.354 in BADL 1SNA399903R0200 50 4.70
2 End sections 2.5 mm 0.098 in Grey FEAD2 1SNA199423R1000 20 1.30
3 4 3 Circuit separators 5 mm 0.197 in Grey FEAD6 1SNA199435R1400 20 1.80
4 Tools Semi automatic tool OUPAD 1SNA178944R0400 1 205.00
Hand tool OUMAD 1SNA179466R0600 1 29.00
5 Terminal block markers Blank card RCAL85 1SNA237000R0500 1 2.90
Complete list of accessories is indicated in the terminal block datasheet.
5 Some accessories such as jumper bars may modify the terminal blocks ratings: complete information in the accessories catalogue pages.

Ground IDC terminal blocks 1SNC163064S0201 - Rev. A
Description Color Type Order code Pkg Weight
pce (1 pce) g
Ground Profle aligned with DS2.5/8.ADO Green-yellow DS2.5/8.P.ADO 1SNA199528R2100 100 10.00
All the technical data for UL/CSA standard and dimensions in inches are in italic.
Technical data valid for copper conductors only.
136 | ABB Solution series - Terminal blocks