Page 145 - 1SNC160020C0201_Solution series

DR2.5/8.ADO IDC terminal blocks

Miniblocks ADO - ADO - 8 mm 0.315 in spacing

2.5 mm² Description
The mini blocks are particularly designed for applications where space is very restricted,
14 AWG With the ABB ADO System , experience the fastest and most reliable connection on the market,
®
Designed for control applications exposed to severe constrains (vibrations, shocks, corrosion etc.),
Up to 2 wires per connection.
Ordering details
Description Color Type Order code Pkg Weight
pce (1 pce) g
1SNC163089F0014 for wire size
100
6.00
DR2.5/8.ADO
Feed-through
With rib and 2 notches
1SNA199287R2000
Grey
1-2.5 mm (16-14 AWG)
2
Without rib for TB
assembly extremity Grey DRE2.5/8.ADO 1SNA299555R0000 20 6.00
and 2 notches for wire
size 1-2.5 mm 2
(16-14 AWG)
DR2.5/8.ADO Main technical data Mounting instructions
IEC UL CSA Rail TH 15-5.5
6
ADO Rigid - Solid / Stranded 1-2.5 mm² 16-14 AWG Wire stripping
31 1.22" Flexible 1-2.5 mm² 16-14 AWG length
33.5 1.32" Screw clamp Rigid - Solid / Stranded Tool
Flexible
with insulated ferrule
Gauge
Rated current / Rated cross section 24 A / 2.5 mm² 25 A / 14 AWG
15.5 0.61" Rated short-time withstand current (1s) 8000 A Torque
Rated voltage 1000 V 600 V
0.315" 8
DR Impulse withstand voltage 8000 V
DRE Protection IP20 NEMA 1
The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards.
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certifcates and technical datasheet available on http://www.ABB.com
8 mm 0.315 in spacing
CUS
RoHS cCSAus Gost R
Notes
End section FEAD1 to be mounted directly on the open part of the terminal
DRE... 5 - 6 - 8 FEAD2
block.
End terminal block DRE has to be mounted at the end of the terminal
blocks assembly: it reduces its size, because it suppresses the insulation
rib (- 4 mm).
FEAD6
Nota: This terminal block cannot be accidently located anywhere else into
the terminal block assembly (without locking holes)
Separator FEAD5 which snaps on the terminal blocks, separates and
makes visible the different parts of the terminal blocks assembly.
DR... 5 - 6 - 8
Accessories
1 2 Description Color Type Order code Pkg Weight
pce (1 pce) g
1 End stops 6.5 mm 0.256 in Grey BADRL 1SNA199420R2100 50 2.00
2 End sections 2.5 mm 0.098 in Grey FEAD2 1SNA199423R1000 20 1.30
3 Circuit separators 5 mm 0.197 in Grey FEAD6 1SNA199435R1400 20 1.80
3 4 4 Tools Semi automatic tool OUPAD 1SNA178944R0400 1 205.00
Hand tool OUMAD 1SNA179466R0600 1 29.00
5 Terminal block markers Blank card RCAL85 1SNA237000R0500 1 2.90
Complete list of accessories is indicated in the terminal block datasheet.
5 Some accessories such as jumper bars may modify the terminal blocks ratings: complete information in the accessories catalogue pages.

Ground IDC terminal blocks 1SNC163068S0201 - Rev. A
Description Color Type Order code Pkg Weight
pce (1 pce) g
Ground Profle aligned with DR2.5/8.ADO Green-yellow DR2.5/8.P.ADO 1SNA299633R0600 100 8.00
All the technical data for UL/CSA standard and dimensions in inches are in italic.
Technical data valid for copper conductors only.
140 | ABB Solution series - Terminal blocks