Page 249 - 1SNC160020C0201_Solution series

M4/6.D2.2S2 screw clamp terminal blocks

Disconnect with pull lever - with 2 independent circuits - 6 mm
0.236 in spacing

4 mm² Description
Save space with double deck terminal blocks: 2 idependent disconnect circuits in just 6 mm 0.236 in spacing,
10 AWG Black pull lever controls upper deck contact and grey pull lever controls lower deck contact,
Closed terminal block: no end section needed.
Ordering details
Description Color Type Order code Pkg Weight
pce (1 pce) g
Disconnect With 2 independent Grey, black M4/6.D2.2S2 1SNA199444R2500 25 30.00
1SNC161073F0014 Main technical data Mounting instructions
circuits

UL
Rail
G32, TH 35-7.5,
CSA
IEC
TH 35-15
1 conductor Rigid - Solid / Stranded 0.2-4 mm² 24-10 AWG Wire stripping 9.5 mm
per clamp Flexible 0.2-4 mm² length 0.374 in
with insulated ferrule
M4/6.D2.2S2 Gauge A4 Tool Flat screwdriver
Ø 4 mm
Ø 0.157 in
Rated current / Rated cross section 10 A / 4 mm² 10 A / 10 AWG
94.5 3.72"
Rated short-time withstand current (1s) 120 A Torque 0.5 - 0.8 Nm
Rated voltage 500 V 300 V 4.4 - 7.1 lb.in
119 4.68" 111 4.37" Impulse withstand voltage 6000 V NEMA 1
Protection
IP20
114 4.48" 106 4.17" The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards.
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certifcates and technical datasheet available on http://www.ABB.com
111.5 4.38" 103.5 4.07" CE RoHS cCSAus Gost R
CUS
45.5 1.79" Notes
50.5 1.98"
Mounting of the vertical jumper bar between
decks (ITVE2)
6 mm 0.236 in spacing Interconnection between decks is possible on
each side of the switch, using accessory ITVE2.
Trap door opens with a screwdriver.

12

Accessories
Description Color Type Order code Pkg Weight
1 2 pce (1 pce) g
1 End stops 12 mm 0.472 in Grey BADH 1SNA116900R2700 50 24.00
2 Jumper bars 1 poles 24 A Grey AD2.5 1SNA114205R2000 50 1.60
3 Lateral jumper bars 2 poles 35 A Grey PC6-2 1SNA113546R1400 10 2.00
3 poles PC6-3 1SNA116536R0500 10 2.00
3 4 4 poles PC6-4 1SNA116537R0600 10 3.00
10 poles PC6-10 1SNA113548R2600 10 8.00
4 Insulating tips For lateral jumper bars type PC... EIP 1SNA113550R2400 10
5 Shield connectors CBD2S 1SNA178408R1400 50
5 6 6 Inner deck jumper bars ITVE2 1SNA179825R2600 20 1.30
7 Terminal block markers Blank card White RC610 1SNA233000R0100 1 7.50
Complete list of accessories is indicated in the terminal block datasheet.
Some accessories such as jumper bars may modify the terminal blocks ratings: complete information in the accessories catalogue pages.
1SNC161159S0201 - Rev. A
7

All the technical data for UL/CSA standard and dimensions in inches are in italic.
Technical data valid for copper conductors only.
ABB Solution series - Terminal blocks | 241