Page 250 - 1SNC160020C0201_Solution series

M4/6.D2.2S2 screw clamp terminal blocks
Disconnect with pull lever with 2 independent circuits and 4 test

sockets - 6 mm 0.236 in spacing

4 mm² Description
Save space with double deck terminal blocks: 2 idependent disconnect circuits in just 6 mm 0.236 in spacing,
10 AWG Black pull lever controls upper deck contact and grey pull lever controls lower deck contact,
Ease your test operations with the 2 built-in test sockets,
Closed terminal block: no end section needed.
Ordering details
Description Color Type Order code Pkg Weight
pce (1 pce) g
1SNC161073F0014 circuits and 4 test sockets
25
With 2 independent
Disconnect
30.00
M4/6.D2.2S2.T
1SNA199448R0100
Grey, black
DIA 2 mm 0.079 in
Main technical data Mounting instructions
IEC UL CSA Rail G32, TH 35-7.5,
TH 35-15
1 conductor Rigid Solid / Stranded 0.2-4 mm² 24-10 AWG Wire stripping 9.5 mm
M4/6.D2.2S2 per clamp Flexible 0.2-4 mm² length 0.374 in
with insulated ferrule
Gauge A4 Tool Flat screwdriver
Ø 4 mm
Ø 0.157 in
94.5 3.72"
119 4.68" 111 4.37" Rated current / Rated cross section 10 A / 4 mm² 10 A / 10 AWG Torque 0.5 - 0.6 Nm
120 A
Rated short-time withstand current (1s)
500 V
4.4 - 5.3 lb.in
300 V
Rated voltage
114 4.48" 106 4.17" Impulse withstand voltage 6000 V NEMA 1
IP20
Protection
111.5 4.38" 103.5 4.07" The connecting capacity data for one Rigid Solid / Stranded Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards.
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certifcates and technical datasheet available on http://www.ABB.com
CUS
45.5 1.79" CE RoHS cCSAus Gost R
50.5 1.98"
Notes
6 mm 0.236 in spacing Mounting of the vertical jumper bar between
decks (ITVE2)
Interconnection between decks is possible on
each side of the switch, using accessory ITVE2.
Trap door opens with a screwdriver.
12

Accessories
Description Color Type Order code Pkg Weight
1 2 pce (1 pce) g
1 End stops 12 mm 0.472 in Grey BADH 1SNA116900R2700 50 24.00
2 Jumper bars 1 poles 24 A Grey AD2.5 1SNA114205R2000 50 1.60
3 Lateral jumper bars 2 poles 35 A Grey PC6-2 1SNA113546R1400 10 2.00
3 poles PC6-3 1SNA116536R0500 10 2.00
3 4 4 poles PC6-4 1SNA116537R0600 10 3.00
10 poles PC6-10 1SNA113548R2600 10 8.00
4 Insulating tips For lateral jumper bars type PC... EIP 1SNA113550R2400 10
5 Test plugs DIA 2 mm 0.079 in Black FC2 1SNA007865R2600 100
5 6 6 Shield connectors CBD2S 1SNA178408R1400 50
7 Inner deck jumper bars ITVE2 1SNA179825R2600 20 1.30
8 Terminal block markers Blank card White RC610 1SNA233000R0100 1 7.50
Complete list of accessories is indicated in the terminal block datasheet.
Some accessories such as jumper bars may modify the terminal blocks ratings: complete information in the accessories catalogue pages.
1SNC161160S0201 Rev. A
7 8

All the technical data for UL/CSA standard and dimensions in inches are in italic.
Technical data valid for copper conductors only.
242 | ABB Solution series - Terminal blocks