Page 28 - Kabeldon

Switching devices with dependent manual operation

SLD 2, 400 A

2

PHD 2 PHD 2 SDC
Parallel handle for parallel Parallel handle for parallel operation
operation of two SLD 2 in of two SLD 2 in enclosures SDC
enclosures CDC. and CSS switchgears.

KSBD 2 KNB 2
Blocking device. Linking knife.

SLD 2 JDDA 2
Fuse-switch-disconnector Earthing device.
− AC-23B according to IEC 60947-3 at 400 V.
− 12 modules or 150 mm width
− Fuse NH 2 or linking knife KNB 2.
− Possibility for parallel operation
− Tested up to 1000 V for installation in dry
indoor environments.
− When using SLD 2 in 1000V systems, fuses
that are designed for 1000 V must be used.
STM 400 ADP 300
Note: Conductor rail with connector Insulated connector for parallel
Switching devices to be tightened with the torque. for current transformer conductors with fuse-switch-
disconnectors SLD 1, SLD 2 and
For “Tightening torque” see page 5/6. metering. Dimensions of also circuit-breakers
conductor rail are 25x13 mm.
ABB Tmax T5.
Designation ID No. Degree of Number of Rated data when voltage level Cable connection Weight
protection modules 400 V 690 V 1000 V Al/Cu
M * A mm² kg/pcs
SLD 2 2CGX0 63050109 IP2X 12 400 ** 355 100 50-300 *** 4.6
* One module M = 12.5 mm.
** 400 A with fuse, 630 A with linking knife.
*** Max. conductor cross section refers to connection with a stranded or solid conductor.
To be ordered separately:
Designation ID No. Degree of Rated data Dimensions Cable connection Numbers Weight
protection H B D Al/Cu per kit
mm mm² kg/pcs
JDDA 2 2CGX0 63190401 – 16.2 kA/1 s – – – – 1 2.5
PHD 2 2CGX0 63090024 – – – – – – 1 1.5
PHD 2 SDC 2CGX0 63090023 – – – – – – 1 1.5
KSBD 2 2CGX0 63190110 – – – – – – 3 0.1
KNB 2 2CGX0 53190321 – 630 A – – – – 3 0.2
STM 400 2CGX0 63090026 IP2X 400 V, 400 A 220 35 85 50-300 1 0.4
ADP 300 2CGX0 63090035 IP2X 690 V, 630 A 253 38 127 2//50-300 1 0,8

2/11 | 2016 | Kabeldon fusegear and cable distribution cabinets | Switching devices |