Page 303 - EPR Catalog 2015

Analog signal converters - CC-U range
Technical data

Type CC-U/STD CC-U/RTD 3) CC-U/TC

Input circuits - Analog inputs J-G-H Current Voltage Potentio- Temperature sen- Thermocouples

meter sors (IEC 584-1 and 2)
470 ⏲
Input signal 0-20 mA 0-100 mV -1 M⏲ 2) PT10, PT100, TC.K TC.J
4-20 mA 0-1 V PT1000
Limitation of input signals 10-50 mA 0-5 V - (IEL 751 and JICC TC.T TC.S
Rated input range 0-1 mA 1-5 V 1604)
0-10 V TC.E TC.N
Influence of line resistance ± 55 mA 2-10 V
Gain adjustment range - ± 10 V TC.R TC.B
(universal devices) ± 11 V
Offset adjustment range (universal devices) --
Input impedance -
without detection of input signal interruption Max. temperature refer to
with detection of input signal interruption
Suppression at 50 Hz adjustable: temperature
Common-mode rejection
Output circuits - Analog outputs 6-60 °C for PT1000 specs. of individual 4
Output signal
Output burden 50-500 °C for PT100 thermocouples
Accuracy 1)
Residual ripple 500-850 °C for PT10
Response time
Transmission frequency -- - 0.015 °C/⏲ < 0.01 % / 100 ⏲
Supply circuits -
Rated supply voltage 0.9- 45 mV - see DIP switch settings
Supply voltage range 110 mA 22 V
Supply voltage tolerance ±5% ± 10 %
Rated frequency -137.5...+62.5 %
Power consumption
for different ranges --
--
51 ⏲ 6 M⏲ 3 G⏲ --
9.5 G⏲ - > 40 dB
51 ⏲ 3.5 M⏲ -

--

--- 120 dB 105 dB
Voltage
D-F, A-C Current 0-5 V, 1-5 V, 0-10 V, 2-10 V, ± 10 V

0-20 mA, 4-20 mA

ͨ 600 ⏲ ͧ 4.7 K⏲
±0.1 % of full-scale ±0.2 % of full-scale ±0.1 % of full-scale

- < 0.15 % -
200 μs 10 ms 200 ms
1 kHz 80 Hz 2 Hz (to -3 dB)
K-M DC versions AC versions
24-48 V DC
24-48 V DC / 24 V AC 110-240 V AC
DC: -15...+15 % 110-240 V AC / 100-300 V DC
AC: -15...+10 %

0 Hz or 50/60 Hz 4.5 VA at 230 V AC
2 W at 24 V DC

Indication of operational states U: green LED
Supply voltage

General data -20...+60 °C / -40...+80 °C
Ambient temperature rangeoperation / storage
Temperature coefficient ±150 ppm/°C ±250 ppm/°C ±200 ppm/°C at
any min. offset
Mounting position ±400 ppm/°C at
Mounting max. offset

DIN rail (IEC/EN 60715), snap-on mounting / screw mounting with adapter

Electrical connection rigid plug-connector with screw terminals 0.2-2.5 mm2 (24-12 AWG)
Wire size fine-strand with(out) wire end ferrule plug-connector with screw terminals 0.2-2.5 mm2 (24-12 AWG)

Stripping length 7 mm (0.28 inch)

Tightening torque 0.4 Nm (3.5 ib.in)

Electromagnetic compatibility EN 61000-6-2
Interference immunity
IEC/EN 61000-4-2 Level 3 (±6 kV / ±8 kV)
electrostatic discharge (ESD) IEC/EN 61000-4-3 10 V/m
electromagnetic field (HF radiation resistance) IEC/EN 61000-4-4 Level 3 (±2 kV / 5 kH)
fast transients (Burst) IEC/EN 61000-4-5 ±2 kV / ±1 kV
powerful impulses (Surge) IEC/EN 61000-4-6 10 V
HF line emission
Interference emission EN 61000-6-4 Class B

Isolation data

Isolation test (between all isolated circuits) 1.5 kV

Test voltage (between all isolated circuits) 1.5 kV / 50 Hz

1) Includes non-linearity and factory setting, influenced by supply voltage and output load.
2) Detection of an input signal break (fail safe) and resistance > 10 k⏲ results in a linearity of Ȁ0.2 %.
3) When connecting a 2-wire sensor, the terminals J and H have to be jumpered.
Approvals see „Overview“ on page 4/3

2CDC 110 004 C0210 | Catalog Electronic Products and Relays 2015 | ABB 4/24