Page 91 - Kabeldon

Pre-assembled distribution board for direct kWh metering

CDCS 2520, CDCS 6320

Pre-assembled service distribution boards for direct kWh
metering type CDCS 2520 for 25 A and CDCS 6320 for
63 A complete with all essential components for connecting
the service line feeder and also an outgoing cable.

In these distribution boards, space for maximum six outgoing
groups type SLD 000 is available. The service line feeder
is to be connected to a terminal block for maximum
50 mm² Al/Cu conductors.
4
− The enclosures are tested according to IEC 61439-5 and
fulfill the requirements for use in arctic climate.
− Degree of protection, enclosures, IP34D.
− Degree of protection, switching devices, IP2X according
to IEC 60529.
− The foundation is integrated in the enclosure both for
putting up on the floor indoors, and in the ground for
installation outdoors.
− Subscriber lock (triangular) to upper section, DIN 3 lock
for lower section and key to respective lock are included.
− Adapted to TN-C-S.

CDCS 2520
CDCS 6320

Designation ID No. Fuse-switch Max Free space Weight
Rated current outgoing on the busbar
A groups M * kg/pcs
CDCS 2520 2CGX0 63301145 25 6 20 55
CDCS 6320 2CGX0 63301146 63 6 20 55
* One module M = 12.5 mm.

Options and accessories, to be ordered separately:
Material for additional outgoing groups

SLD 000 AD 70 AD 95
Fuse-switch-disconnectors. Non-insulated connector. insulated connector.
Options and accessories Rated Designation ID No. Cable connection Width Weight See page
current Al/Cu
A mm² M * kg/pcs
Outgoing groups 100 SLD 000 (C00) 2CGX0 63050106 2.5-95 3 1.7 2/7
Connection to phase busbar 200 AD 95 2CGX0 63030249 6-95 2 0.1 2/18
PE/N clamp – AD 70 2CGX0 63030038 6-95 – 0.1 2/18
* One module M = 12.5 mm.

| Pre-assembled distribution boards | Kabeldon fusegear and cable distribution cabinets | 2016 | 4/4