Page 93 - Kabeldon

Pre-assembled distribution board for standby power

CDCR 63, SDCR 125

Pre-assembled distribution board with standby power switch,
inlet and metering is available in two variants:
− CDCR 63 with direct kWh metering.
− SDCR 125 with transformer metering
Complete with all essential components for connecting the
service cable. Outgoing groups are not included.

Space for outgoing groups varies between 12 for CDCR 63 and
13 for SDCR 125. The service line feeder is to be connected to a
terminal block for maximum 50 mm² Al/Cu conductors. 4
− Enclosures are tested according to IEC 61439-5 and fulfill the
requirements for use in arctic climate.
− Degree of protection, enclosures, IP34D.
− Degree of protection, switching devices, IP2X according
to IEC 60529.
− The foundation of CDCR 63 is integrated in the enclosure
both for putting up on the floor indoors, and in the ground
for installation outdoors.
− For SDCR 125 the choice of foundation is dependent to
putting up indoors on the floor or fixed on the wall; or also
installation outdoors in the ground, see page 4/8 for
suitable foundation. CDCR 63 SDCR 125
− Subscriber lock (triangular) for upper section and DIN 3
lock for lower section.
− Keys included; KSNR 4 to subscriber lock, NKD 3 to DIN 3.
− Adapted to TN-C-S.

Designation ID No. Switch-fuse Fitting fuse Max Free space Dimensions Weight
Rated current type outgoing on the busbar Height Width Depth
groups
A M * mm kg/pcs
CDCR 63 2CGX0 63301204 63 DIII 12 38 1800 740 220 95
SDCR 125 2CGX0 63301205 125 NH 00 13 40 1530 1166 312 125
* 1 module M = 12,5 mm.
Options and accessories, to be ordered separately:
Material for additional outgoing groups

SLD 000 SLD 00 SLD 1 AD 70, ADO 240
Fuse-switch-disconnector. Fuse-switch-disconnector. Fuse-switch-disconnector. Non-insulated connector.
Options and Rated current Designation ID No. Cable connection Number of Weight See page
accessories Al/Cu modules
A mm² M * kg/pcs
Outgoing groups 100 SLD 000 (C00) 2CGX0 63050106 2.5-95 3 1.7 2/7
Outgoing groups 160 SLD 00 (00) 2CGX0 63050107 2.5-95 4 1.8 2/8
Outgoing groups 250 SLD 1 (1) 2CGX0 63050108 50-300 10 4.3 2/10
PE-/N clamp – AD 70 2CGX0 63030038 6-95 – 0.1 2/18
PE-/N clamp – ADO 240 2CGX0 63030263 120-240 – 0.25 2/18
* One module M = 12.5 mm.
| Pre-assembled distribution boards | Kabeldon fusegear and cable distribution cabinets | 2016 | 4/6