Page 92 - Kabeldon

Pre-assembled distribution boards for transformer metering

CDCS 16015 and SDCS 16023, 25018, 25043

Pre-assembled service distribution boards are available in four
variants for 160 A or 250 A, complete with all essential components
for connecting the service cable, mounting current transformer,
terminal blocks and meter. Outgoing groups are not included.

Space for outgoing groups varies from 5 to maximally 14 depending
on the size of the chosen service distribution board.

− Enclosures are tested according to IEC 61439-5 and fulfill the
4 requirements for use in arctic climate.
− Degree of protection, enclosures, IP34D.
− Degree of protection, switching devices, IP2X according
to IEC 60529.
− The foundation of CDCS 16015 is integrated in the enclosure
both for putting up on the floor indoors, and in the ground for
installation outdoors.
− For SDCS the choice of foundation is dependent to putting
up indoors on the floor or fixed on the wall; or also installation
outdoors in the ground, see page 4/8 for suitable foundation.
− Subscriber lock (triangular) for upper section and DIN 3
lock for lower section.
− Keys included; KSNR 4 to subscriber lock, NKD 3 to DIN 3. CDCS 16015 SDCS 25043
− Adapted to TN-C-S.

Designation ID No. Switch-fuse Max Free space Dimensions Weight
Rated current outgoing groups on the busbar Height Width Depth
A M * mm kg/pcs
CDCS 16015 2CGX0 63301122 160 / 125 ** 5 15 1800 600 220 79
SDCS 16023 2CGX0 63301123 160 / 125 ** 7 23 1523 682 312 88
SDCS 25018 2CGX0 63301124 250 / 224 ** 6 18 1523 682 312 94
SDCS 25043 2CGX0 63301125 250 / 224 ** 14 43 1523 996 312 115
* One module M = 12.5 mm.
** Rated current with enclosure.
Options and accessories, to be ordered separately:
Material for additional outgoing groups

SLD 000 SLD 00 SLD 1 AD 70, ADO 240
Fuse-switch-disconnector. Fuse-switch-disconnector. Fuse-switch-disconnector. Non-insulated connector.
Options and Rated current Designation ID No. Cable connection Number of Weight See page
accessories Al/Cu modules
A mm² M * kg/pcs
Outgoing groups 100 SLD 000 (C00) 2CGX0 63050106 2.5-95 3 1.7 2/7
Outgoing groups 160 SLD 00 (00) 2CGX0 63050107 2.5-95 4 1.8 2/8
Outgoing groups 250 SLD 1 (1) 2CGX0 63050108 50-300 10 4.3 2/10
PE-/N clamp – AD 70 2CGX0 63030038 6-95 – 0.1 2/18
PE-/N clamp – ADO 240 2CGX0 63030263 120-240 – 0.25 2/18
* One module M = 12.5 mm.
4/5 | 2016 | Kabeldon fusegear and cable distribution cabinets | Pre-assembled distribution boards |