Page 310 - Entrelec Terminal Blocks Master Catalog

D4/6.ADO IDC terminal blocks
Feed-through ADO - screw clamp - 6 mm 0.236 in spacing

Description
1.5 mm²
®
– With the TE Connectivity ADO System , experience the fastest and most reliable connection on the market,
16 AWG – This solution brings all the benefits of the ADO System and allows installators to connect on standard screw clamp,
®
– Up to 2 wires per connection in the ADO System connection.
®
Ordering details
Description Color Type Part Number Pkg Weight
pce (1 pce) g
Feed-through Grey D4/6.ADO 1SNA199034R1500 50 7.00
1SNC163061F0014 Orange D4/6.ADO 1SNA199035R1600 50 7.00
1SNA199036R1700
D4/6.N.ADO
Blue
50
7.00
Main technical data
Rail
TH 35-7.5,
IEC UL CSA Mounting instructions
2 TH 35-15
ADO Rigid: Solid/Stranded 0.34-1.5 mm² 22-16 AWG 22-16 AWG Wire stripping 9.5 mm
Flexible without ferrule 0.34-1.5 mm² length 0.37 in
D4/6.ADO
Screw clamp Rigid: Solid/Stranded 0.2-4 mm² 22-10 AWG 22-10 AWG Tool Flat screwdriver
Flexible without ferrule 0.22-4 mm² Ø 4 mm
Flexible with insulated ferrule Ø 0.157 in
45 1.77" Gauge A4
Rated current / Rated cross section 17.5 A / 1.5 mm² 18 A / 16 AWG 18 A / 16 AWG
Rated short-time withstand current (1s) 180 A Torque 0.5 - 0.8 N.m
Rated voltage 1000 V 600 V 600 V 4.4 - 7.1 lb.in
56 2.20" 48.5 1.91" Impulse withstand voltage 8000 V NEMA 1
IP20
Protection
The connecting capacity data for one Rigid: Solid/Stranded, or one Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors).
All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on http://www.TE.com
C US
RoHS USR CNR cCSAus Gost R
23 0.91"
6 mm 0.236 in spacing

Accessories
Description Color Type Part Number Pkg Weight
pce (1 pce) g
1 2
1 End stops 10 mm 0.394 in Dark grey BAM4 1SNK900001R0000 50 14.00
5.2 mm 0.205 in BAZ1 1SNK900002R0000 50 5.30
2 End sections 3 mm 0.118 in Grey FEDAD1 1SNA199336R2000 20 2.50
3 Jumper bars 2 poles 32 A BJMI6-2 1SNA176663R0000 10 4.40
3 4 3 poles BJMI6-3 1SNA176664R0100 10 6.70
4 poles BJMI6-4 1SNA176665R0200 10 8.90
5 poles BJMI6-5 1SNA176666R0300 10 11.20
10 poles BJMI6-10 1SNA176667R0400 10 22.40
4 Lateral jumper bars 2 poles 35 A Grey PC6-2 1SNA113546R1400 10 2.00
5 6
10 poles PC6-10 1SNA113548R2600 10 8.00
5 Insulating tips For lateral jumper bars type PC... EIP 1SNA113550R2400 10
6 Circuit separators 0 mm 0 in Grey SCAD 1SNA196896R0000 10
7 Shield connectors CBM5 1SNA178745R1400 50
7 8 8 Tools Semi automatic tool OUPAD 1SNA178944R0400 1 205.00
Hand tool OUMAD 1SNA179466R0600 1 29.00
9 Terminal block markers Blank card White RC610 1SNA233000R0100 1 7.50
Complete list of accessories is indicated in the terminal block datasheet.
Some accessories such as jumper bars may modify the terminal block’s ratings: complete information in the accessories catalogue pages.
9

1SNC163002S0201 - Rev. A

Ground IDC terminal blocks
Description Color Type Part Number Pkg Weight
pce (1 pce) g
Ground Profile aligned with D4/6.ADO Green-yellow D4/6.P.ADO 1SNA199050R0100 50 11.00
Technical data valid for copper conductors only.

INDUSTRIAL /// ENTRELEC - DEDICATED APPLICATIONS TERMINAL BLOCKS